Products

ATLAS COPCO HB 200

The HB 2500 hydraulic breaker attachment is designed for demolition, tunneling, trenching, foundation work, rock mining and secondary breaking.

• Suitable for carriers in the 29 to 43 metric ton weight class.

• Accepts maximum hydraulic flow of 58 gallons per minute at 2,610 psi of pressure.

• Delivers an impact rate of up to 550 blows per minute.

• Comes with AutoControl, a monitoring system that allows the breaker to adapt its frequency and power output to match operating conditions.

• Comes equipped with the VibroSilenced damping system to help reduce noise.

Visit www.atlascopco.com for more information.

GENESIS DEMOLITION BUCKET

Genesis Attachments has introduced a demolition bucket for use with wheel and track loaders.

• Designed to resist twisting even when handling oversized, uneven loads.

• Weld-on wear teeth (on top clamp) and wear plates are constructed of abrasion-resistant AR400 steel.

• Available in two sizes: GDMB 250 (2-2.5 cubic yard capacity) and GDMB 350 (3-3.5 cubic yard capacity).

• Additional sizes will be available soon.

Visit www.genesisattachments.com or e-mail info@genesisattachments.com for more information.

HITACHI ZAXIS 450LC-3

The Zaxis 450LC-3 replaces the 450LC in Hitachi Construction Product’s equipment line.

• Machine is powered by an Isuzu AH-6WG1XYSA-01 six-cylinder Tier-3-certified engine.

• Excavator weighs 106,180 pounds and comes standard with a 12-foot, 10-inch arm and a 20,172-pound counterweight.

• Also comes standard with triple semi-grouser shoes.

• Other arm lengths include 9 feet, 6 inches, 11 feet, 2 inches and 16 feet, 1 inch.

• Isuzu engine offers 348 net peak hp at 1,800 rpm.

Visit www.hitachiconstruction.com for more information.

TEREX PEGSON X400

This track-mounted jaw crusher is being launched in European markets.

• For primary crushing in recycling and quarrying applications.

• Available in both hydraulic adjust (XA400) and hydraulic release (XR400) versions.

• Has a vibrating grizzly feeder with an extended twin cartridge grizzly section.

• Options include a dirt conveyor with a new troughing system, overband magnet, radio remote control and under feeder screen.

Visit www.bl-pegson.com for more information.

GEHL ALL-WHEEL-STEER LOADERS

The 80-Series of All-Wheel-Steer (AWS) Loaders is designed with four-wheel steering and a one-piece chassis.

• Four models are available: 280, 480, 480T (telescopic) and 680.

• Operating weights range from 7,055 pounds to 12,015 pounds and bucket capacities ranging from 1.44 cubic yards to 2.35 cubic yards.

• Operating loads range from 2,590 to 4,365 pounds.

• Machines are equipped with "intelligent drive" technology—when the loader is driven into a pile of material, speed is automatically reduced without the operator needing to shift gears.

Visit www.gehl.com for more information.

BOBCAT SWEEPER

Bobcat Co. has introduced an 84-inch sweeper attachment.

• Includes a floating bristle head, direct-drive motor, solid-mounted hood and optional wheel kit and gutter brush.

• Attachment is for use on Bobcat skid steers, compact track loaders and A300 all-wheel steer loader.

• The flowing bristle head follows the surface contours independently of the bucket, providing improved surface contact on slopes.

Visit www.bobcat.com or www.ingersollrand.com for more information.

AIM HEAVY DUTY GPL BUCKETS

AIM Attachments has introduced a line of heavy duty loader buckets for wheel loaders of all sizes.

• GPL buckets are made with an AR400 steel cutting edge with reinforced corners and gussets. The company uses AR400 steel because it is 30 percent stronger and 46 percent harder than T-1 steel, according to a news release from AIM Attachments.

• All buckets are pre-drilled to accept optional bolt-on side cutters and teeth.

• Design also features an abrasion-resistant bottom with thick wear straps.

• Bucket can be used for stock piling, bank loading and excavation.

• The sloped bottom design provides maximum dump clearance.

Visit www.aimattachments.com for more information.

ROCKSER R700TR

The Rockster Recycler R700TR is a track mounted impact crusher.

• The unit weighs 18 metric tons and has an output capacity of up to 130 metric tons per hour.

• The crusher has a four blow bar rotor.

• Drive unit is powered by a Cat or John Deere engine.

Visit www.rockster.at or e-mail marketing@rockster.at for more information.

POWERSCREEN ORION 1400

The Powerscreen Orion 1400 trommel typically sets up in approximately 15 minutes and provides high mobility with heavy duty, low ground pressure crawler tracks.

• Applications include recycling, wood chips, compost and topsoil.

• Wheel undercarriages are also available.

• The hopper is more than 12 feet long and has a capacity of 5.63 cubic yards.

• The 14-foot-by-5-foot drum has 169.4 square feet of screen area and variable speed control to 24.5 rpm.

• Screen angle is adjustable from flat to 4 degrees.

• The reversible, direct-drive, 36-inch feed conveyor has a hydraulic "kick out" to prevent barrel stalling.

• Other conveyors include 48-inch collection, 32-inch oversize, 28-inch transfer and 32-inch fines.

• Machine has friction four-wheel drive system with reversible option to "rock" the barrel.

Visit www.powerscreenusa.com or e-mail info@terexcs.com for more information.

ACTION CONVEYOR DENSE-OUT VIBRATORY SEPARATOR

The Dense-Out Vibratory Separator is a specialized vibratory air system designed to classify mixed materials based on differences in density.

• Available in a number of standard sizes, depending on size of material.

• Separator is designed to remove "heavies" such as rocks, bricks, metal, glass, etc., from less dense materials.

• Uses dry separation, eliminating the need for a water supply.Visit www.actionconveyors.com for more information.

MUSTANG 842 TLEHANDLER

Mustang Manufacturing Co. Inc. has introduced a new telescopic handler to its product line—the model 842.

• The four-story machine has a 42-foot lift height and its addition brings the total of 8,000-pound machines in Mustang’s product line to two.

• The new unit shares a boom design with the larger Mustang Deluxe Series of telehandlers, models 944 and 1155. It also has pilot-operated joystick controls, a tilt cylinder and an optional work platform system.

• The 842 also has a rear-axle stabilizer cylinder that gives operators a stable four-point stance when the boom is raised over 60 degrees, a ROPS/FOPS canopy with increased room for the operator and axles with internal wet disc breaks that dissipate heat more efficiently to help increase the service life of the breaks.

Visit www.mustangmfg.com for more information.

CP1210 HANDHELD BREAKER SERIES

The 1210 Handheld Breaker Series is designed for light-to-medium demolition of floors, pavement, frozen ground and masonry walls.

• With an improved valve system, the 1210 series provides 20 percent more hitting power than previous models.

• Each model requires 59 cfm of air and delivers 1,400 blows per minute.

• The breakers are offered in three versions: basic, silenced and vibration-reduced.

• A variety of shank sizes are available to accommodate all applications.

Visit www.cpconstructiontoolsusa.com for more information.